Best for small must for all

Residential Chillers and Heat Pumps - Climaveneta Climate Technologies

  • BRA2 0021 - 0061 Air-cooled Liquid Chillers

    BRA2 is the Climaveneta range of air-cooled liquid chillers with R410A refrigerant. They are fitted with hermetic Scroll compressors and Full Floating technology. The latter is an intelligent electronic unit providing the perfect answer to residential market requirements: compactness, ease of installation and quietness. The unit are designed for indoor installation with radial plug-fan as standard equipment. The air outflow can be ducted in vertical or horizontal. The units can be arranged to satisfy a wide range of system requirements: with base or with integrated EC inverter pump low consumption, ErP2015 complied. Version: B-basic Features Structure and base in hot-dip galvanised steel with epoxy powder paint finish. Hermetic scroll type compressors, equipped with the crankcase heater and thermal protection High efficiency, low pressure drop AISI 316 stainless steel plate heat exchangers, fitted with heating element to provide frost protection. Finned coils made with copper pipes and aluminium fins with large exchange surface area, tested for leaks with dried air at 30 bar. Coil protection grid for models 0011÷0061. Radial fan, plug-fan type Continuous fan speed regulation with pressure switch User interface unit on board, accessible from the outside with a not touch system Differential pressure switch. Extensive operating limits in cooling mode, leaving water temperature up to -10°C and max external air temperature +46°C

  • BRH 0011 - 0121 Water Cooled Chillers

    BRH is a range of water-source liquid chillers operating with R410A refrigerant. These are indoor units with hermetic Scroll compressors and Full Floating technology. The latter is an intelligent electronic unit providing the perfect answer to residential market requirements: compactness, ease of installation and quietness. Version: FF - Basic version, with built-in hydronic kit FFT - Basic version without hydronic kit Features Structure and base in hot-dip galvanised steel with epoxy powder paint finish. High-efficiency plate exchangers in AISI 316 stainless steel with low pressure drops (exchanger on plant side fitted with heating element for frost protection). External access to control with anti-tamper device. The safety of the unit is guaranteed by a door lock isolator on the electrical power switchboard and by active protection devices on the main components. The circuit includes: -Modulating valve to reduce water consumptions (source side, FF versions only). -Circulating pump (plant side, FF versions only). -Air vent valve (plant side). -Expansion vessel (plant side). -Safety valve (plant side). -Differential pressure switch on plant circuit only. -Drain valve on both the plant and the source circuits. Accessory: Removable metal mesh water filter kit HSW10 remote keyboard

Contact Us

Get Best Quotes

Fill the form below to get Best Quotes from us -

Downloads
Manage Your Profile